exp/FY2008/R403n の変更点

• 追加された行はこの色です。
• 削除された行はこの色です。
• exp/FY2008/R403n へ行く。

TITLE:R403n

&size(24){[[babirl操作についてはこちら>exp/FY2008/R403n/DAQ]]};

*RIPS Network in J5, E6 [#c6559959]
|ns.ripsnet       |192.168.0.1 |rooter                                       |
|entrance.ripsnet |192.168.0.2 |entrance into ripsnet                        |
|builder.ripsnet  |192.168.0.11|builder in babirl                            |
|branch01.ripsnet |192.168.0.21|daq for beamline monitor                     |
|branch02.ripsnet |192.168.0.22|daq for dali, si-timing                      |
|branch03.ripsnet |192.168.0.23|daq for hodo                                 |
|branch04.ripsnet |192.168.0.24|daq for si-analogue                          |
|bootstrap.ripsnet|192.168.0.31|daq start & stop messenger                   |
|config01.ripsnet |192.168.0.32|caen net controller for hodo                 |
|config03.ripsnet |192.168.0.33|QDC setting for DALI                         |
|monitor01.ripsnet|192.168.0.41|                                             |
|monitor02.ripsnet|192.168.0.42|                                             |
|monitor03.ripsnet|192.168.0.43|                                             |
|monitor04.ripsnet|192.168.0.44|                                             |
|monitor05.ripsnet|192.168.0.45|                                             |
|monitor06.ripsnet|192.168.0.46|                                             |
|monitor07.ripsnet|192.168.0.47|                                             |
|nas01.ripsnet    |192.168.0.51|data storage                                 |
|dalihv.ripsnet   |192.168.0.61|controller for DALI power supply             |
|ssdhv.ripsnet    |192.168.0.62|controller for SSD power supply              |
|plhv.ripsnet     |192.168.0.63|controller for HODO, Beamline Pl power supply|
*SSD [#a91cbaea]
+ストリップ 5 x 5 - 4 (四隅無し) : 読み出しは 50 + 7
+ストリップ 5 x 5 - 4 (四隅無し) : 読み出しは 50 + 7
+パッド 3 x 3 : 読み出しは 9
+パッド 3 x 3 : 読み出しは 9
+パッド 3 x 3 : 読み出しは 9


*DAQ [#mdcade27]
-rdf (ridf) -> rawdata の変換について
segment id, module geometry, channel から、detector category(catid : 検出器の種類の識別子), detector id(detid: 検出器カテゴリの中の検出器一台の識別子), data type (idata : 測定したデータ種類の識別子) へのマッピングを行う。&br;
&color(red){rawdata の参照は、rawdata(idata,detid,catid) で行うことができる。};
--detector category id は以下のとおり
|caterogy|detector|h
|RIGHT:  |        |c
|1       |Beamline Plastic|
|2       |RF              |
|3       |Beamline Si     |
|4       |PPAC            |
|5       |DALI            |
|6       |Si              |
|7       |HODO            |
--segment id と取得するデータおよびモジュールの対応は以下のとおり&br;
|branch|segment|geometry|module|address|detector|memo|h
|RIGHT:|RIGHT: |RIGHT:  |CENTER:|RIGHT:|CENTER: |CENTER:|c
|1     |1      |3       |V792  |0x1100 |Beamline Plastic|charge     |
|1     |1      |5       |V775  |0x00B1 |Beamline Plastic|timing     |
|1     |2      |7       |V785  |0x0049 |Beamline Si     |pulse hight|
|1     |3      |9       |V775  |0x00B2 |PPAC            |timing     |
|1     |3      |11      |V792  |0x1200 |PPAC            |charge     |
|1     |9      |16      |V513  |0x7700 |Coincidence     |coincidence|
|2     |4      |6       |V792  |0x00A1 |DALI            |charge     |
|2     |4      |7       |V792  |0x00A2 |DALI            |charge     |
|2     |4      |8       |V792  |0x00A3 |DALI            |charge     |
|2     |4      |9       |V792  |0x00A4 |DALI            |charge     |
|2     |4      |10      |V792  |0x00A5 |DALI            |charge     |
|2     |5      |16      |V1190A|0x7100 |DALI            |timing     |
|2     |5      |19      |V1190A|0x7200 |DALI            |timing     |
|2     |6      |13      |V775N |0x0016 |Si              |timing     |
|3     |8      |2       |V775  |0x0023 |HODO(dE)        |timing     |
|3     |8      |3       |V775  |0x0024 |HODO(E1)        |timing     |
|3     |8      |4       |V775  |0x0025 |HODO(E2)        |timing     |
|3     |8      |5       |V792  |0x0013 |HODO(dE)        |charge     |
|3     |8      |6       |V792  |0x0014 |HODO(E1)        |charge     |
|3     |8      |7       |V792  |0x0015 |HODO(E2)        |charge     |
|4     |7      |6       |V785  |0x4200 |Si              |pulse hight|
|4     |7      |7       |V785  |0x4300 |Si              |pulse hight|
|4     |7      |8       |V785  |0x4400 |Si              |pulse hight|
|4     |7      |9       |V785  |0x4500 |Si              |pulse hight|
|4     |7      |10      |V785  |0x4700 |Si              |pulse hight|
|4     |7      |11      |V785  |0x4800 |Si              |pulse hight|