Router setting (register new fixed address)
General
- Router at J1: Buffalo WSR-600DHP
WSR-600DHP : Wi-Fi router AirStation | Buffalo
- LAN information
| IP address | 192.168.1.1 |
|---|---|
| subnet mask | 255.255.255.0 |
| MAC address | SSID | |
|---|---|---|
| LAN | CC:E1:D5:C6:99:C2 | |
| WLAN (2.4 GHz) | CC:E1:D5:C6:99:C2 | CRIB-J1-2G |
| WLAN (5.0 GHz) | CC:E1:D5:C6:99:C3 | CRIB-J1-5G |
-Authentification for configuring the router:
| user | admin |
|---|---|
| password | password |
Configuration
-
Access the router via www using a web browser (from DAQ network, http://192.168.1.1).

-
Click the “環境設定 (Configuration).
-
Select "Internet>Internet" in the side bar.

You can check the configurations for the internet connections (the figure may be for an old setting).
-
Select "LAN->LAN"

to check the LAN settings. IP addresses in the range of 192.168.1.x (x=2-244) are available for our devices.
-
Select “LAN>DHCPリース

to see the present DHCP lease information. Note: Presently, some specific IP addresses are allocated to certain devices, as can be listed here, and they are excluded from the DHCP allocation. However, we should be aware that they are not completely fixed (never changing) IP addresses.