diff --git a/README.md b/README.md
index 8c2f02799e8ebff2c57eaffa78371bd9dc26d8aa..69d45517fda09a1dca1b53905939497b7b348db0 100644
--- a/README.md
+++ b/README.md
@@ -15,16 +15,16 @@ This is a tool to convert ridffile to rootfile using ANAROOT decoder. (https://r
 ANAROOT is automatically installed by "cmake" in the project directory in order to make it easier to edit decoder file. The part of install of ANAROOT is written in ./CMakeLists.txt.
 
 ## Note
-* Multihit TDC records all hit in one trigger, but this tool include only one hit event.
-  * Now, this stores the data of the last hit, but do we need to stores all hit or first hit?
-  * -> if first hit is more important, simply we can change in "main.cpp", but if all hits are needed, source files are needed to edit. (in preparation (okawa) )
+* Multihit TDC records all hit in one trigger, but map tree include only one hit event. (last hit)
+  * raw data tree store all hit and calibration tree also contain all hit
+  * the format of timing branch of calibration tree are array (like branch[12]) in order to match the format of mhtdc
 
-* The structure of the branches of rootfile depends on the map file, so now a single branch contains both ADC and TDC data and it is distinguished by channel.
+* The structure of map tree branches depends on the map file, so now a single branch contains both ADC and TDC data and it is distinguished by channel.
   * ex. "name[0]": ADC, "name[1]": TDC
 
 * When the name contains "-", "/" or " " in mapfile and we use it as branch name, sometimes it is recognized as an operator, so this tool change them to "\_".
 
-* The format of 
+* Calibration tree depends on the map tree. And the name of parameter file is important (cannot name arbitrary)
 
 * Assume that calibration parameters of two energy output are the same
 
@@ -37,14 +37,13 @@ ANAROOT is automatically installed by "cmake" in the project directory in order
 * calibration/(expname)/**.prm
 * main.cpp
 
-#### YAML file
+[yaml file setting](doc/yamlfile.md)
 
+[map file setting](doc/mapfile.md)
 
-#### Map file
-
-
-#### Calibration parameter file
+[calibration parameter file setting](doc/calibrationfile.md)
 
+[main.cpp setting](doc/main.md)
 
 ### Install
 This is cmake based project, so make build directory and compile in it.
diff --git a/calibration/si26a/dssd.prm b/calibration/si26a/dssd.prm
index b327fc4aff2cf03c8c6bcdfd4e94896604bc7c90..4b4505fabb121b3427e4cf7a7a32fd68c6828b95 100644
--- a/calibration/si26a/dssd.prm
+++ b/calibration/si26a/dssd.prm
@@ -4,67 +4,67 @@
 1
 
 # c0, c1, c2, ... , cn; name
-0.0, 1.0; dssd_Tel1_dE1X_1
-0.0, 1.0; dssd_Tel1_dE1X_2
-0.0, 1.0; dssd_Tel1_dE1X_3
-0.0, 1.0; dssd_Tel1_dE1X_4
-0.0, 1.0; dssd_Tel1_dE1X_5
-0.0, 1.0; dssd_Tel1_dE1X_6
-0.0, 1.0; dssd_Tel1_dE1X_7
-0.0, 1.0; dssd_Tel1_dE1X_8
-0.0, 1.0; dssd_Tel1_dE1X_9
-0.0, 1.0; dssd_Tel1_dE1X_10
-0.0, 1.0; dssd_Tel1_dE1X_11
-0.0, 1.0; dssd_Tel1_dE1X_12
-0.0, 1.0; dssd_Tel1_dE1X_13
-0.0, 1.0; dssd_Tel1_dE1X_14
-0.0, 1.0; dssd_Tel1_dE1X_15
-0.0, 1.0; dssd_Tel1_dE1X_16
-0.0, 1.0; dssd_Tel1_dE2Y_1
-0.0, 1.0; dssd_Tel1_dE2Y_2
-0.0, 1.0; dssd_Tel1_dE2Y_3
-0.0, 1.0; dssd_Tel1_dE2Y_4
-0.0, 1.0; dssd_Tel1_dE2Y_5
-0.0, 1.0; dssd_Tel1_dE2Y_6
-0.0, 1.0; dssd_Tel1_dE2Y_7
-0.0, 1.0; dssd_Tel1_dE2Y_8
-0.0, 1.0; dssd_Tel1_dE2Y_9
-0.0, 1.0; dssd_Tel1_dE2Y_10
-0.0, 1.0; dssd_Tel1_dE2Y_11
-0.0, 1.0; dssd_Tel1_dE2Y_12
-0.0, 1.0; dssd_Tel1_dE2Y_13
-0.0, 1.0; dssd_Tel1_dE2Y_14
-0.0, 1.0; dssd_Tel1_dE2Y_15
-0.0, 1.0; dssd_Tel1_dE2Y_16
-0.0, 1.0; dssd_Tel2_dE2Y_1
-0.0, 1.0; dssd_Tel2_dE2Y_2
-0.0, 1.0; dssd_Tel2_dE2Y_3
-0.0, 1.0; dssd_Tel2_dE2Y_4
-0.0, 1.0; dssd_Tel2_dE2Y_5
-0.0, 1.0; dssd_Tel2_dE2Y_6
-0.0, 1.0; dssd_Tel2_dE2Y_7
-0.0, 1.0; dssd_Tel2_dE2Y_8
-0.0, 1.0; dssd_Tel2_dE2Y_9
-0.0, 1.0; dssd_Tel2_dE2Y_10
-0.0, 1.0; dssd_Tel2_dE2Y_11
-0.0, 1.0; dssd_Tel2_dE2Y_12
-0.0, 1.0; dssd_Tel2_dE2Y_13
-0.0, 1.0; dssd_Tel2_dE2Y_14
-0.0, 1.0; dssd_Tel2_dE2Y_15
-0.0, 1.0; dssd_Tel2_dE2Y_16
-0.0, 1.0; dssd_Tel3_dE2Y_1
-0.0, 1.0; dssd_Tel3_dE2Y_2
-0.0, 1.0; dssd_Tel3_dE2Y_3
-0.0, 1.0; dssd_Tel3_dE2Y_4
-0.0, 1.0; dssd_Tel3_dE2Y_5
-0.0, 1.0; dssd_Tel3_dE2Y_6
-0.0, 1.0; dssd_Tel3_dE2Y_7
-0.0, 1.0; dssd_Tel3_dE2Y_8
-0.0, 1.0; dssd_Tel3_dE2Y_9
-0.0, 1.0; dssd_Tel3_dE2Y_10
-0.0, 1.0; dssd_Tel3_dE2Y_11
-0.0, 1.0; dssd_Tel3_dE2Y_12
-0.0, 1.0; dssd_Tel3_dE2Y_13
-0.0, 1.0; dssd_Tel3_dE2Y_14
-0.0, 1.0; dssd_Tel3_dE2Y_15
-0.0, 1.0; dssd_Tel3_dE2Y_16
+0.0, 2.0; dssd_Tel1_dE1X_1
+0.0, 2.0; dssd_Tel1_dE1X_2
+0.0, 2.0; dssd_Tel1_dE1X_3
+0.0, 2.0; dssd_Tel1_dE1X_4
+0.0, 2.0; dssd_Tel1_dE1X_5
+0.0, 2.0; dssd_Tel1_dE1X_6
+0.0, 2.0; dssd_Tel1_dE1X_7
+0.0, 2.0; dssd_Tel1_dE1X_8
+0.0, 2.0; dssd_Tel1_dE1X_9
+0.0, 2.0; dssd_Tel1_dE1X_10
+0.0, 2.0; dssd_Tel1_dE1X_11
+0.0, 2.0; dssd_Tel1_dE1X_12
+0.0, 2.0; dssd_Tel1_dE1X_13
+0.0, 2.0; dssd_Tel1_dE1X_14
+0.0, 2.0; dssd_Tel1_dE1X_15
+0.0, 2.0; dssd_Tel1_dE1X_16
+0.0, 2.0; dssd_Tel1_dE2Y_1
+0.0, 2.0; dssd_Tel1_dE2Y_2
+0.0, 2.0; dssd_Tel1_dE2Y_3
+0.0, 2.0; dssd_Tel1_dE2Y_4
+0.0, 2.0; dssd_Tel1_dE2Y_5
+0.0, 2.0; dssd_Tel1_dE2Y_6
+0.0, 2.0; dssd_Tel1_dE2Y_7
+0.0, 2.0; dssd_Tel1_dE2Y_8
+0.0, 2.0; dssd_Tel1_dE2Y_9
+0.0, 2.0; dssd_Tel1_dE2Y_10
+0.0, 2.0; dssd_Tel1_dE2Y_11
+0.0, 2.0; dssd_Tel1_dE2Y_12
+0.0, 2.0; dssd_Tel1_dE2Y_13
+0.0, 2.0; dssd_Tel1_dE2Y_14
+0.0, 2.0; dssd_Tel1_dE2Y_15
+0.0, 2.0; dssd_Tel1_dE2Y_16
+0.0, 2.0; dssd_Tel2_dE2Y_1
+0.0, 2.0; dssd_Tel2_dE2Y_2
+0.0, 2.0; dssd_Tel2_dE2Y_3
+0.0, 2.0; dssd_Tel2_dE2Y_4
+0.0, 2.0; dssd_Tel2_dE2Y_5
+0.0, 2.0; dssd_Tel2_dE2Y_6
+0.0, 2.0; dssd_Tel2_dE2Y_7
+0.0, 2.0; dssd_Tel2_dE2Y_8
+0.0, 2.0; dssd_Tel2_dE2Y_9
+0.0, 2.0; dssd_Tel2_dE2Y_10
+0.0, 2.0; dssd_Tel2_dE2Y_11
+0.0, 2.0; dssd_Tel2_dE2Y_12
+0.0, 2.0; dssd_Tel2_dE2Y_13
+0.0, 2.0; dssd_Tel2_dE2Y_14
+0.0, 2.0; dssd_Tel2_dE2Y_15
+0.0, 2.0; dssd_Tel2_dE2Y_16
+0.0, 2.0; dssd_Tel3_dE2Y_1
+0.0, 2.0; dssd_Tel3_dE2Y_2
+0.0, 2.0; dssd_Tel3_dE2Y_3
+0.0, 2.0; dssd_Tel3_dE2Y_4
+0.0, 2.0; dssd_Tel3_dE2Y_5
+0.0, 2.0; dssd_Tel3_dE2Y_6
+0.0, 2.0; dssd_Tel3_dE2Y_7
+0.0, 2.0; dssd_Tel3_dE2Y_8
+0.0, 2.0; dssd_Tel3_dE2Y_9
+0.0, 2.0; dssd_Tel3_dE2Y_10
+0.0, 2.0; dssd_Tel3_dE2Y_11
+0.0, 2.0; dssd_Tel3_dE2Y_12
+0.0, 2.0; dssd_Tel3_dE2Y_13
+0.0, 2.0; dssd_Tel3_dE2Y_14
+0.0, 2.0; dssd_Tel3_dE2Y_15
+0.0, 2.0; dssd_Tel3_dE2Y_16
diff --git a/doc/calibrationfile.md b/doc/calibrationfile.md
new file mode 100644
index 0000000000000000000000000000000000000000..36f949a6f1d18ff455a6bcc5ec9ef1fa7a8221e6
--- /dev/null
+++ b/doc/calibrationfile.md
@@ -0,0 +1,3 @@
+# parameter file setting
+
+calibration tree will be created based on map tree. Since the correspondence between branches and maps is based on name matches, names in parameter file should write carefully.
diff --git a/doc/develop_memo.md b/doc/develop_memo.md
new file mode 100644
index 0000000000000000000000000000000000000000..9c18752024e4879927ff2b9a113750fcf9ab8df0
--- /dev/null
+++ b/doc/develop_memo.md
@@ -0,0 +1,33 @@
+# develop_memo
+PPAC is not developed yet!!
+
+## in create branch
+
+#### rawdata
+* Separate cases when the name is "mhtdc" and when it is not.
+
+-> if there are multiple mhtdc, it will be error!!
+
+-> Should I change the conditional statement? (TCordferBranchManager->CreateRawBranch, ClearRawAll)
+
+#### mapdata
+I think it is OK
+
+#### calibdata
+* Separate cases according to specific name in yamlfile.
+
+-> I should make rule to name
+
+
+## mapping
+unordered_map map[key] = value
+
+#### rawdata
+key = segment_id (=geo) <- "mhtdc_nhit" is set to -1
+
+value = branch_index
+
+#### mapdata
+
+
+#### calibdata
diff --git a/doc/main.md b/doc/main.md
index e69de29bb2d1d6434b8b29ae775ad8c2e48c5391..7144cea6e33cf16ad756c605041c4470478bb371 100644
--- a/doc/main.md
+++ b/doc/main.md
@@ -0,0 +1,30 @@
+# main.cpp
+
+## setting parameter
+* bool rawdata
+  * "true" -> raw data tree will be created
+* bool mapdata
+  * "true" -> map tree will be created
+* bool calibration
+  * "true" -> calibrated tree will be created
+  * **NOTE**: calibrated tree require map tree, so mapdata = true; and calibration = true; is needed
+* bool print_progress
+  * "true" -> display the process of data conversion in stdout
+* TString yamlfile
+  * Set the path to the yaml file in which the settings are written
+
+## content
+1. **CheckCommandLine** -> read information written on the command line
+2. **Readyaml** -> read specified yaml file
+3. **CreateRootFile** -> prepare rootfile
+4. **Create__Tree** -> create trees (Raw->tree, Map->mtree, Calib->ctree)
+5. **Create__branch** -> create each branches from config file ***(should be improved)***
+6. **Create__Mapping** -> mapping each branch to the id on the DAQ ***(should be improved)***
+7. **TArtEventStore**
+    * Read and decode ridf file using ANAROOT library
+8. **Clear__All** -> initialize value
+9. **Give__Value** -> Store decoded values in mapped branches ***(should be improved)***
+    * geo: detector, ch: channel, val: recorded value
+10. **__Fill** -> store values in the branches in one event
+11. **__DataWrite** -> write the created trees to the rootfile
+12. **FileClose** -> close the rootfile
diff --git a/doc/mapfile.md b/doc/mapfile.md
index e69de29bb2d1d6434b8b29ae775ad8c2e48c5391..a46f87d61ba557d927cff9a368a4a128351ffddb 100644
--- a/doc/mapfile.md
+++ b/doc/mapfile.md
@@ -0,0 +1,2 @@
+# mapfile setting
+these mapfile was created for the ANAPAW. I copied from ANAPAW source.
diff --git a/doc/yamlfile.md b/doc/yamlfile.md
index e69de29bb2d1d6434b8b29ae775ad8c2e48c5391..82008728717f86b31b6dae8bf3af93f7411120e0 100644
--- a/doc/yamlfile.md
+++ b/doc/yamlfile.md
@@ -0,0 +1,10 @@
+# yamlfile setting
+
+## tree information
+probably no need to change default values
+
+## mapfile and calibration file information
+Write the paths of mapfile and calibration file. "mssd" must be specified in name if MUX is used.
+
+## for rawdata tree
+The "segment_no." must be filled in with the value set in the DAQ (babirl)
diff --git a/macro/compare.C b/macro/compare.C
index 2c63c0851048d8f7bff41ecf0f8cee05f52fd120..6093a3f2066fb6c063b84764f4ee384cc824c78a 100644
--- a/macro/compare.C
+++ b/macro/compare.C
@@ -1,2 +1,20 @@
 {
+  gStyle->SetOptLogy(1);
+
+  TCanvas *c1 = new TCanvas("c1", "c1");
+
+  c1->Divide(2, 2);
+
+  c1->cd(1);
+  tree->Draw("madc1[2]");
+
+  c1->cd(2);
+  ctree->Draw("dssd_Tel1_dE1X_3");
+
+  c1->cd(3);
+  tree->Draw("madc1[3]");
+
+  c1->cd(4);
+  ctree->Draw("dssd_Tel1_dE1X_4");
+
 }
diff --git a/recipe/recipe_si26a.yml b/recipe/recipe_si26a.yml
index 054e6fb658ab7793cdfd8b059b5d7abbac865289..12b9c3db8f324e5c96621ae3c58d4f181ce6be2d 100644
--- a/recipe/recipe_si26a.yml
+++ b/recipe/recipe_si26a.yml
@@ -9,7 +9,7 @@ calib_tree:
   name: "ctree"
   description: "calibrate data tree"
 
-#mapfile information
+#mapfile and calibration file information
 map_setup:
   - name: coin
     mapfile: "../map/si26a/coin.map"
diff --git a/src/TCordferBranchManager.cpp b/src/TCordferBranchManager.cpp
index 6a2d0c278e720043c855e6da6f8f3de756f0e533..d4be30029b2acef72a1291d1fa5176a8bc741789 100644
--- a/src/TCordferBranchManager.cpp
+++ b/src/TCordferBranchManager.cpp
@@ -61,6 +61,7 @@ void TCordferBranchManager::CreateRawBranch(){
     Int_t seg_id = setup[i]["segment_no."].as<int>();
     TString bname = setup[i]["name"].as<string>();
     if(bname != "mhtdc"){
+    //if(string(bname.Data()).find("mhtdc") == string::npos){
       Int_t nch = setup[i]["channel"].as<int>();
       TCordferRawBranch *raw_branch = new TCordferRawBranch(bname, nch);
       raw_branch->Setgeo(seg_id);