Type: General
Category: General
Tags: 
Subject: Daily meeting note (3.5)
====== Daily meeting note (3.5) ======

* **Line#2**
	* New alignment has been done during the night shift (MCP-PMT 100%, overall 80% coincidence)
	* Power glitch observed
		* Log1: https://www.cns.s.u-tokyo.ac.jp/~lim/elog/doku.php?id=2026-03_raris:126
		* Log2: https://www.cns.s.u-tokyo.ac.jp/~lim/elog/doku.php?id=2026-03_raris:127
	* Suggestion from Simone: additional data measurement with special DUT jig (col-row type) -> will be done after this measuremnt
	* Data taking plan will be completed by tomorrow -> any further measurement plan?
		* We should check the data quality by tonight for ensuring 
* **Line#1**
	* Setupdone, Data taking ongoing -> rough timing resolution obtaind: AC-LGAD ~100 ps
	* RCNP - individual Streaming daq setup along with Kaneta-san's setup
		* Setup: EDM4EIC format root file can be used now -> EICRecon can be used (tested with another data)
			* From now on, test beam data can be streamed to the DAQ system.
			* EICRecon full configuration -> geometry is not included -> this has to be done (geometry, module number, etc) <- maybe too heavy for testing purpose?
		* Data root file -> Xrootd system is ready but not used now (no such a benefit )
* **Line#3**
	* HV-dependent measurment is on going.
		* Current measurment: Now 4 col 50 um (back) 4 col 20 um (front)
	* QA plot: under preparation
		* some of channel shows zero(0) noise -> strange, under investigation now.