Type: General
Category: Setup
Tags: 
Subject: Detector movement for alignment
====== Detector movement for alignment ======

1. Trigger -> move both -3mm (Y) - reason: missing shadow in LGAD01, DUT bottom (~2mm)
3. LGAD05 -> move +5mm (Y) -> reason: table height +5mm showed the best cross-section
4. Keep LGAD01 -> reason: DUT since we couldn't find the results well 
5. LGAD02, LGAD04 -> move - 3mm (X) -> reason: missing signals in +X positions (~2mm)