Type: General
Category: General
Tags: 
Subject: DUT position scan early tests
====== DUT position scan early tests ======

Double-checking strip planes orientation, as in the picture of the blackboard. DUT has horizontal strips which means that automatic X-scanning is parallel to the strips. Taking a scan anyway with -+6, -+3, 0, the rate should drop but the channel configuration should not change

pos 0 and pos -3 show same distribution across channels but different total number of events as expected (pos -3 has more events)

*Action: 3D print and change the DUT support to have vertical strip to perform x-direction automatic scans perpendicular to the strips.
***--> No Action, this is as intended!**