Re: Data type change: int8 -> float16

The TeleDyne LeCroy Control Class (https://github.com/BongHwi/TeleDyneLeCroyControl) was handling the scope data with 8bit type.

This issue has been solved by adding this line: self.write("CFMT DEF9,WORD,BIN") for configuring the scope.

The attached plot shows the two different waveform shapes (RED: new 12bit, BLUE: old, 8bit)

Details:

The issue has been found by Satoshi, observing the raw wave form with unnatural (descreted signal shape)

→ Disussed for the proper shape of the signal → The current oscilloscope was 12bit type (HD), so it should handle 12bit data (4096 points) → The current scope class was based on the 8bit data (int8) → Forcing 16 bit data type (WORD instead of BYTE) soved the issue. → Git PR https://github.com/BongHwi/TeleDyneLeCroyControl/commit/ddce5bc11b95bd501fe7f39d3b570cd8c1377d9a