2026-03_raris:start [ELOG]

Home
Help

Logged in as: Guest

Logbooks: 2026-03_RARIS 2026-02_KEK

Login

Fixed

E-Log : 2026-03_raris:start

2026-03 RARiS

Link to General information of the test beam campagin

Shared album

https://photos.app.goo.gl/qmGoE2bcaej9F9ay5

Mode:Full | Summary | Threaded

ID	Date	Author	Type	Category	Subject
179	Fri Apr 24 14:01:25 2026	Bong-Hwi Lim	General	Beam3_RFSoC	Re: RFSoC channel and DUT sensor channel correspondence
ReplyTo: 161 Re: RFSoC channel and DUT sensor channel correspondence Board1 row1-8: rfsoc1 ch0 Board1 row1-6: rfsoc1 ch1 Board1 row1-4: rfsoc1 ch2 Board1 row1-2: rfsoc1 ch3 Board1 row1-7: rfsoc3 ch0 Board1 row1-5: rfsoc3 ch1 Board1 row1-3: rfsoc3 ch2 Board1 row1-1: rfsoc3 ch3 Board1 row2-1: rfsoc2 ch0 Board1 row2-3: rfsoc2 ch:1 Board1 row2-5: rfsoc2 ch2 Board1 row2-7: rfsoc2 ch3 Board1 row2-2: rfsoc4 ch0 Board1 row2-4: rfsoc4 ch1 Board1 row2-6: rfsoc4 ch2 Board1 row2-8: rfsoc4 ch3 Board2 row1-8 rfsoc1 ch4 Board2 row1-6: rfsoc1 ch5 Board2 row1-4: rfsoc1 ch6 Board2 row1-2: rfsoc1 ch7 Board2 row1-7: rfsoc3 ch4 Board2 row1-5: rfsoc3 ch5 Board2 row1-3: rfsoc3 ch6 Board2 row1-1: rfsoc3 ch7 Board2 row2-1: rfsoc2 ch4 Board2 row2-3 rfsoc2 ch:5 Board2 row2-5: rfsoc2 ch6 Board2 row2-7: rfsoc2 ch7 Board2 row2-2: rfsoc4 ch4 Board2 row2-4: rfsoc4 ch5 Board2 row2-6: rfsoc4 ch6 Board2 row2-8: rfsoc4 ch7
178	Sat Mar 07 01:20:03 2026	Hiroki Iizuka	General	Beam3_RFSoC	Re: pixel-type AC-LGAD : 3/6 20:30~
ReplyTo: 176 Re: pixel-type AC-LGAD : 3/6 20:30~ Run 174 を動かしたまま、一晩放置します
177	Sat Mar 07 01:05:07 2026	Hiroki Iizuka	General	General	Beam 周期変更
Beam 周期変更ビーム周期が、10sON-20sOFF の30s から10sON-17sOFFの27s に変更されました
176	Sat Mar 07 00:47:07 2026	koyuki iwatsuki	General	Beam3_RFSoC	pixel-type AC-LGAD : 3/6 20:30~
pixel-type AC-LGAD : 3/6 20:30~ DUT1 : pixel-type AC-LGAD(W7 big ), DUT2 none RUN \| HV1 \| I1 \| HV2 \| I2 \| start \| stop \| time \| events \| rate \| comments 166 \| -140 \| -0.746uA \| — \| — \| 06-Mar-26 20:23:00 \| 06-Mar-26 20:37:46 \| 14m 46s \| 127,863 \| 144 Hz \| 167 \| -140 \| -0.8 uA \| — \| — \| 06-Mar-26 20:38:04 \| 06-Mar-26 20:43:01 \| 4m 57s \| 105,402 \| 354 Hz \| 電流値記入し忘れ 168 \| -140 \| -0.853uA \| — \| — \| 06-Mar-26 20:43:11 \| 06-Mar-26 20:48:40 \| 5m 29s \| 113,319 \| 344 Hz \| 169 \| -140 \| -0.861uA \| — \| — \| 06-Mar-26 20:52:57 \| 06-Mar-26 21: 40:33 \| 47m 36s \| 1,001,743 \| 350 Hz \| 170 \| -140 \| -0.903uA \| — \| — \| 06-Mar-26 21:41:16 \| 06-Mar-26 22:28:47 \| 47m 31s \| 1,003,148 \| 352 Hz \| 171 \| -140 \| -0.908uA \| — \| — \| 06-Mar-26 22:29:43 \| 06-Mar-26 23:19:04 \| 49m 21s \| 1,038,247 \| 350 Hz \| 172 \| -140 \| -0.923uA \| — \| — \| 06-Mar-26 23:19:17 \| 07-Mar-26 23:52:45 \| 33m 28s \| 710,168 \| 354 Hz \| (Access) 173 \| -140 \| -0.840uA \| — \| — \| 06-Mar-26 00:00:30 \| 06-Mar-26 00:34:28 \| 33m 02s \| 580,725 \| 293 Hz \| 途中でイベント収集されなくなった \
175	Fri Mar 06 20:39:11 2026	Simone Mazza	General	General	Line 2 double DUT setup
Line 2 double DUT setup Changed DUT to double DUT in line one Sensor front: 2col 50um, horizontal strips, 185V Sensor back: 2col 30um, vertical strips, 197V
174	Fri Mar 06 19:42:11 2026	koyuki iwatsuki	General	Beam3_RFSoC	HV Scan: 3/6 17:00~
HV Scan: 3/6 17:00~ DUT1 : 4col-20um, DUT2 4col-50um (nohole) \ RUN \| HV1 \| I1 \| HV2 \| I2 \| start \| stop \| time \| events \| rate \| comments 161 \| -90V \| -0.363 uA \| -150V \| -0.123 uA \| 06-Mar-26 17:33:55 \| 06-Mar-26 18:00:17 \| 26m 22s \| 405,425 \| 256 Hz \| 162 \| -85V \| -0.031 uA \| -145V \| -0.113 uA \| 06-Mar-26 18:01:26 \| 06-Mar-26 18:10:50 \| 10m 28s \| 128,544 \| 204 Hz \| (Berm stop) 163 \| -85V \| -0.031 uA \| -145V \| -0.113 uA \| 06-Mar-26 18:14:30 \| 06-Mar-26 18:41:08 \| 26m 38s \| 403,904 \| 253 Hz \| 164 \| -80V \| -0.027 uA \| -140V \| -0.105 uA \| 06-Mar-26 18:41:53 \| 06-Mar-26 19:08:17 \| 26m 24s \| 402,428 \| 254 Hz \| 165 \| -75V \| -0.024 uA \| -135V \| -0.098 uA \| 06-Mar-26 19:09:03 \| 06-Mar-26 19:34:03 \| 35m 00s \| 382,918 \| 182 Hz \|
173	Fri Mar 06 18:10:42 2026	Bong-Hwi Lim	General	General	Daily meeting note (3.6)
Daily meeting note (3.6) Line#2 4col-20um → decide to not take 20um data 2col/4col 50/30um data are taken well Next plan → Simon's plan (add one more DUT for the additional tracking layer) ~ Line#1 RCNP team (Streaming DAQ) Base: Using data from NestDAQ, analyzing with EICRecon Now EDM4EIC format is prepared for the AC-LGAD → We could transfer the data into the TOF barrel calibration process (no special calibration process done) → clustering process can be applied soon but we need to configure a strip ID for EDM4EIC format. Upgrade: XRootD → working well. AC-LGAD EDM4EIC transferred well! →MDX2 (proxy Osaka server) → Mini esulon2 server, we can open the root files on the mdx2 (server). → semi-online analysis. Next plan → transfer data without saving them on the local server. Line#3 → All data measuremnts are done, preparing QA now
172	Fri Mar 06 17:35:07 2026	Tatsuki Saito	General	Beam3_RFSoC	HV Scan: 3/6 12:53~17:33
HV Scan: 3/6 12:53~17:33 DUT1 : 4col-20um, DUT2 4col-50um (nohole) RUN \| HV1 \| I1 \| HV2 \| I2 \| start \| stop \| time \| events \| rate \| comments 153 \| -125V \| -0.328 uA \| -190V \| -0.369 uA \| 06-Mar-26 12:53:48 \| 06-Mar-26 13:26:31 \| 32m 43s \| 473,825 \| 242 Hz \| 154 \| -127V \| -0.514 uA \| -185V \| -0.298 uA \| 06-Mar-26 13:35:36 \| 06-Mar-26 14:11:40 \| 45m 9s \| 509,257 \| 188 Hz \| 155 \| -120V \| -0.166 uA \| -180V \| -0.249 uA \| 06-Mar-26 14:12:09 \| 06-Mar-26 14:44:42 \| 32m 33s \| 462,403 \| 237 Hz \| 156 \| -115V \| -0.109 uA \| -175V \| -0.213 uA \| 06-Mar-26 14:47:14 \| 06-Mar-26 15:14:24 \| 29m 42s \| 408,334 \| 229 Hz \| 157 \| -110V \| -0.080 uA \| -170V \| -0.187 uA \| 06-Mar-26 15:15:35 \| 06-Mar-26 15:42:37 \| 28m 13s \| 407,917 \| 241 Hz \| 158 \| -105V \| -0.063 uA \| -165V \| -0.165 uA \| 06-Mar-26 16:10:31 \| 06-Mar-26 16:39:27 \| 28m 56s \| 438,997 \| 253 Hz \| 159 \| -100V \| -0.051 uA \| -160V \| -0.149 uA \| 06-Mar-26 16:40:06 \| 06-Mar-26 17:06:26 \| 26m 20s \| 401,963 \| 254 Hz \| 160 \| -95V \| -0.042 uA \| -155V \| -0.134 uA \| 06-Mar-26 17:06:58 \| 06-Mar-26 17:33:09 \| 26m 11s \| 400,973 \| 255 Hz \| \
171	Fri Mar 06 14:22:48 2026	Bong-Hwi Lim	General	Setup	Re: The beam target changed (same material but thicker one) -> beam rate increased
ReplyTo: 165 Re: The beam target changed (same material but thicker one) -> beam rate increased The current rate has been increased to `4.83 Hz`
170	Fri Mar 06 13:38:04 2026	ono kyouhei	General	General	Line2: Changed the number of segments acquired from 100 to 500
Line2: Changed the number of segments acquired from 100 to 500 取得セグメント数を100から500に変更しました
169	Fri Mar 06 13:30:15 2026	Bong-Hwi Lim	General	Setup	Re: The beam target changed (same material but thicker one) -> beam rate increased
ReplyTo: 165 Re: The beam target changed (same material but thicker one) -> beam rate increased the number of segements updated from 100 to 500. it looks like the we had a lot of transfer during the one fill with 100 segment option.
168	Fri Mar 06 13:26:12 2026	Tatsuki Saito	General	Beam3_RFSoC	LINE3 DUT Change
LINE3 DUT Change 2列20umのセンサーを4列50um(穴なし)に変更しました
167	Fri Mar 06 12:52:10 2026	Bong-Hwi Lim	Error/Fault	General	Re: Line 2 DUT cable mismatch
ReplyTo: 163 Re: Line 2 DUT cable mismatch Next time, the length of the cable, especially for the DUT has to be same for all channels.
166	Fri Mar 06 12:51:01 2026	Bong-Hwi Lim	General	General	The first safety key disabled (beam area)
The first safety key disabled (beam area) The first safety key has been lost by manager (not our fault) → temporary disabled. Please contact him (Tokiyasu-san) if we can find the key in the beam area
165	Fri Mar 06 12:49:18 2026	Bong-Hwi Lim	General	Setup	The beam target changed (same material but thicker one) -> beam rate increased
The beam target changed (same material but thicker one) -> beam rate increased We expect around 2 times more, but for the moment, we're observing ~4 Hz.
164	Fri Mar 06 12:33:44 2026	Simone Mazza	General	General	new DUT il line 2
new DUT il line 2 Changed DUT in line 2, mounted 2col 30um, HV set at 197V
163	Fri Mar 06 12:31:45 2026	Simone Mazza	General	General	Line 2 DUT cable mismatch
Line 2 DUT cable mismatch Channel 2 cable is shorter than the rest, will need to measure after run is done (see pic) This was also seen in the data, time difference of ~500ps for ch2
162	Fri Mar 06 12:27:58 2026	Tatsuki Saito	General	Beam3_RFSoC	HV Scan: 3/6 8:30~11:49
HV Scan: 3/6 8:30~11:49 DUT1 : 4col-20um, DUT2 2col-20um RUN \| HV1 \| I1 \| HV2 \| I2 \| start \| stop \| time \| events \| rate \| comments 151 \| -127V \| -0.481 uA \| -126.706V \| -1 uA \| 06-Mar-26 08:56:59 \| 06-Mar-26 10:51:22 \| 114m 23s \| 1,002,169 \| 146 Hz \| 152 \| -126V \| -0.38 uA \| -126V \| -0.85 uA \| 06-Mar-26 11:04:22 \| 06-Mar-26 11:49:11 \| 44m 49s \| 398987 \| 148 Hz \| \
161	Fri Mar 06 10:04:38 2026	Hiroki Iizuka	General	Beam3_RFSoC	Re: RFSoC channel and DUT sensor channel correspondence
ReplyTo: 45 Re: RFSoC channel and DUT sensor channel correspondence 画像が正しく表示されていないようなので再送
160	Fri Mar 06 10:00:51 2026	Hiroki Iizuka	General	Beam3_RFSoC	3/6 シフターやることリスト
3/6 シフターやることリスト 2026-03_raris:159 のelogを参照しながら、データ量の少なそうな箇所を補う (最低100k events, 適宜増やす) 電圧 0V 時のrunも、同じsetupにつき１回とる (最低100k events) 電流上限時の電圧で、ひたすらデータをとり続ける (時間の許す限り) 可能ならDUT変更もはさみつつ、beam については上記のrun をとるまた、深夜シフトは一部変更が入る (ラスト6時間は、1枚setup・無人の状態で、ひたすら同条件で取り続ける：詳しくはLine2から説明があるはず)